Norge R-01 Red Light Bed

$59,995.00

Inc. GST. Delivery is free within 50 km of a capital city centre, with a distance band beyond. Your electrician fits a dedicated 40 A circuit.

Order now for delivery in January 2027.

Add White Glove Installation for $2,500 with the Installation option. It is not included in the product price.

Norge R-01 Red Light Bed

A full-body light bed for one. 41,000 LEDs in the canopy and the base across five bands: red, near infrared, green, blue and yellow, so light reaches front and back in one lie-down session.

Installation
Book a consult

The light

Above and below, at once.

41,000 LEDs in full-length arrays in the canopy and the base, across five bands: red, near infrared, green, blue and yellow. The hinged canopy closes over you, so light reaches your front and back in the same session and you do not need to turn over.

Norge Red Light Bed: the full-length LED arrays lit red inside the open canopy and base
Full-length LED arrays in the canopy and the base.

Control

Choose the time and the intensity, then lie back.

Norge Red Light Bed: a hand on the touchscreen at the head end of the bed

Touchscreen and app

Set session length and intensity on the large touchscreen at the head end, or from your phone or tablet in the Norge app. Pair your own audio over Bluetooth. Sessions are timed and switch off on their own.

Two modes. Residential mode for longer, gentler sessions. Commercial mode for fast turnaround between clients.

Norge Red Light Bed with the canopy closed: gloss white shell, brushed stainless rails and the N mark on the base
The Norge Red Light Bed with the canopy closed.

Build

Made for back-to-back sessions.

A gloss white composite shell on a sculpted base, with brushed stainless rails and trim. Three facts about how it is made.

Intelligent cooling
High-flow internal fans keep the LEDs and the bed surface comfortable. They run automatically through each session and briefly after it.
Padded, wipe-clean surface
Full length, and designed for back-to-back sessions.
Hinged canopy
It lifts up to get on and off, and closes over you for the session.

Where it goes

At home, in a studio or a clinic.

At 1.94 metres it needs a level, dry indoor floor, about 600 mm clear around the bed for the canopy and airflow, and a room kept ventilated and out of direct sunlight.

  • Norge Red Light Bed in a living room

    At home

    Residential mode for longer, gentler sessions.

  • Norge Red Light Bed in a studio

    Studio or clinic

    Commercial mode turns sessions around quickly.

Sessions

Ten to twenty minutes.

Starting points from the product guide: 10 to 20 minutes at medium intensity after training, 10 to 15 minutes as a short daily session, or a low intensity session in the evening in a dim room. Suggested usage only: adjust session length and intensity to your own comfort, and wear the supplied eye protection.

A woman in a robe beside the Norge Red Light Bed before a session

Delivery and install

One trade to arrange.

Your electrician

Before delivery, a licensed electrician runs a dedicated 40 A single phase circuit to the bed position, fits the 40 A leakage circuit breaker we supply and an isolator at the bed, and certifies the work.

Norge. Delivery is free within 50 km of a capital city centre and banded by distance beyond. With White Glove Installation, $2,500, our team places and levels the bed, powers it up, runs a test session and walks you through the touchscreen, app pairing and eye protection. It is ready for your first session the same day.

Specification

Specification

The Norge Red Light Bed, figure by figure.

The bed 15
Type
Full-body red light bed
Capacity
1 person, lying down
Size
1940 x 860 x 820 mm (L x W x H, canopy closed)
Light source
41,000 LEDs in the canopy and the base
Bands
Red, near infrared, green, blue, yellow
Output
Up to 6,500 W
Modes
Residential and commercial
Control
Large touchscreen at the head end, phone and tablet app, Bluetooth audio
Operation
Timed sessions, auto off
Exterior
Gloss white composite shell, brushed stainless rails and trim
Lying surface
Padded, wipe-clean, full length
Canopy
Hinged, lifts up
Cooling
Intelligent high-flow internal fans
Compliance
CE marked LED arrays and controls; site wiring to AS/NZS 3000
Eye protection
Supplied
Power and delivery 9
Supply
240 V single phase, hardwired to an isolator at the bed, no plug
Peak draw
27 A at full output
Circuit
Dedicated 40 A single phase circuit, installed by your licensed electrician
Leakage breaker
40 A leakage circuit breaker supplied with the bed
Clearance
About 600 mm around the bed
Room
Level, dry indoor floor; ventilated and out of direct sunlight
Delivery
Free within 50 km of a capital city centre; distance bands beyond, shown at checkout
Installation
White Glove Installation, $2,500: placed, levelled and commissioned by Norge; electrical by your electrician
Warranty
Norge product warranty on the shell, LED arrays and controls from delivery; documentation on request

Questions

Asked before buying

What is included in the price?

$59,995 including GST covers the bed, the 40 A leakage circuit breaker, eye protection and the Norge product warranty. White Glove Installation is $2,500 and covers placement and levelling, commissioning and a walkthrough of the bed. Delivery is free within 50 km of a capital city centre; beyond that, a distance band is shown at checkout.

Do I need an electrician?

Yes, one trade. The bed is hardwired and draws up to 27 A at full output, so it needs its own 40 A single phase circuit from the switchboard, not a power point. Your licensed electrician runs the circuit before delivery, fits the leakage breaker we supply and an isolator at the bed, sizes the cable for the run, and issues a certificate of compliance. Everything else is handled by Norge.

What does the room need?

A level, dry indoor floor that can carry the bed and the user, about 600 mm clear around the bed for the canopy to open and for airflow, a room that can be kept ventilated and out of direct sunlight, and an access route that fits a 1940 x 860 x 820 mm bed through doors, stairs or lifts. Any building, strata or premises approvals are arranged by you.

When can I use it?

The same day it is delivered, once your electrician has certified the circuit. Our team commissions the bed, runs a test session and pairs the app with your phone or tablet.

Can a studio run more than one bed?

Yes. The supply needs to be sized for every bed at full output, so have your switchboard capacity assessed before delivery. Commercial mode is built for fast turnaround between clients.

Should anyone check before using it?

Consult a medical professional before use if you are pregnant, photosensitive or taking photosensitising medication. Always wear the supplied eye protection and follow the session guidance in the user manual.

Is it a medical device?

No. The Norge Red Light Bed is a wellness product. It is not intended to diagnose, treat, cure or prevent any disease, and Norge does not provide medical advice. Results vary between people and depend on session length, intensity and consistency of use.

What is the warranty?

A Norge product warranty covers the shell, LED arrays and controls from the date of delivery. Full warranty documentation is available on request and forms part of your purchase agreement. It operates in addition to your rights under the Australian Consumer Law.

Talk to a person
Norge R-01 Red Light BedFull-body red light bed, inc. GST
$59,995.00
Consult